Band Sizing - Metal Bracelets

A watch only feels as good as it fits. This guide covers everything you need: swapping bands, removing links and fine-tuning the fit. It works for both our 3-link and 5-link bracelets.

What’s in the Box

  • A link removal screwdriver
  • A push tool for the clasp’s micro-adjust

Before you start: once links are removed, the bracelet can’t be returned. If you’re still deciding whether the watch is a keeper, try it on as-is first and size it once you’re sure. [Return & Refund Policy]

Swapping Bands (Quick-Release)

Every bracelet and strap has quick-release spring bars, so you can change bands in seconds without any tools.

To remove a band:

  1. Lay the watch face-down on a soft cloth.
  2. Find the small tabs (one on each side) on the underside of the band, right where it meets the case.
  3. Squeeze both tabs inward and gently lift the band away from the lug. Repeat on the other side.

To attach a band:

  1. Squeeze both tabs inwards
  2. Position the bracelet into the case, line up the tabs and let go.
  3. Make sure the pin is released into the pin hole. Push each tab outward to ensure it's locked into position.
  4. Give the band a gentle tug on both sides to make sure it’s locked in before you head out.

Removing Links

Step 1: Figure out how many to remove.
Put the watch on and pinch the extra slack together at the clasp. Count how many links you need to take out. For the most comfortable fit, remove the same number from each side of the clasp so the watch stays centred on your wrist.

Step 2: Take out the screws.

  1. Lay the watch on a soft cloth to protect it from scratches.
  2. Find the small screw heads on the side of the links.
  3. Using the included screwdriver, turn the screw counter-clockwise until it comes out.
  4. Separate the link and set it aside.
  5. Repeat for each link you’re removing.

Step 3: Put it back together.

  1. Line up the two ends of the bracelet.
  2. Slide the screw back in.
  3. Turn it clockwise until it’s snug. Don’t overtighten. Snug is enough.

Tip: keep your spare links and screws somewhere safe, like a small bag in the watch box. You’ll want them if you ever resell the watch, or if your wrist size changes.

Fine-Tuning with the Micro-Adjust

Your clasp has a built-in micro-adjust for small changes without removing a whole link. It’s perfect for those “almost there” moments.

  1. Open the clasp all the way so you can see the row of small adjustment holes on the side.
  2. Compress the spring bar. Press the included push tool into the hole where the spring bar sits to push it inward.
  3. Slide the bracelet to the next hole, in or out, depending on whether you want it tighter or looser.
  4. Let it click into place. Release the spring bar into the new hole, then give the bracelet a gentle tug to make sure it’s secure.

Finding the Perfect Fit

  • Links for the big changes, micro-adjust for fine-tuning.
  • One finger: you should be able to slide one finger between your wrist and the bracelet.
  • Snug, not tight: the watch should stay in place without leaving marks on your wrist.
  • Wrists swell a bit through the day, especially when it’s warm. If you’re between sizes, go slightly looser for all-day comfort.

Keeping It in Shape

  • Check the link screws every so often to make sure they’re still snug.
  • Wipe the bracelet with a soft microfibre cloth. 
  • If a screw or spring bar won’t budge, stop there. Forcing it can damage the bracelet, so reach out to us at hello@clockedoutcollective.com and we’ll help you out.